-It can be designed according to the desired power and energy options in power electronic devices.
-It can be designed in different ways for ups, inverter, modular structure.
-For Ups, this panel includes UPS-31 and similar devices.
-Powered by User-Friendly HMI options.
-It can be adapted to the desired device dimensions in panels in accordance with IP standards.
| Input Characteristics | |
| Rectifier | 02/06/12-pulse SCR rectifier or IGBT Switched PWM rectifier |
| Rated input voltage | 380/400/415VAC, 4-wire (A, B, C, PE) |
| Rated operating frequency | 50Hz/60Hz |
| Input voltage range | -15%~+10% |
| Input frequency range | -5%~+5% |
| Input power factor | up to 0.90 (SCR) up to 0.99 (IGBT) |
| DC Characteristics | |
| Blocking Diode (Optional) | Inside UPS Cubicle |
| DC switch | Inside UPS Cubicle |
| Nominal voltage | 110/125/144/220/360VDC (or customizable voltage level) |
| Battery type | Lead acid, nickel cadmium |
| Inverter output voltage | Single-phase 110/220VAC (5-60kVA) / three-phase 380/400/415VAC (10-100kVA) |
| Output power factor | 0.8 |
| Voltage stability (Steady state) | <± 1% |
| Voltage stability (Transient) | (0-100%) <±10% |
| Transient response time | (20-150) ms |
| Inverter overload capacity | 110%: 10 minutes, 125%: 2 minutes, 150%: 10 seconds |
| THDv (100% linear load) | 3% |
| THDv (100% non-linear load) | 8% |
| Efficiency | up to 90% (depends on power rating) |
| Bypass | |
| Bypass input voltage | Single-phase 110/220VAC/ three-phase 380/400/415VAC |
| Bypass voltage range | -10%~+ 10% |
| Maintenance bypass switch | Make before break maintenance switch |
| Static Switch | |
| Frequency | 50Hz/60Hz |
| Frequency synchronization | ± 5% Hz |
| Overload capacity | 300% 100ms |
| System | |
| Noise | 53~70dB |
| Ingress Protection | IP20 up to IP42 |
| Color | RAL7035 (other colors according to customer requirements) |
| Cable entry | Bottom (top cable entry as option) |
| HMI | It can be download from webpage |
| Communication interface | MODBUS RTU RS485 (SNMP, IEC61850, MODBUS TCP option) |
| Free contacts | Programmable 8 dry contacts from HMI |
| Operating Environment | |
| Operating temperature | Range 0 to 50 °C (constant operation at full load at 40 °C) |
| Relative humidity | 0 to 95% without condensation |
| Altitude | ≤ 1000m; above 1000m, load is derated by 1% for every increase of 100m |
